飞出国，公安部审批的出入境中介机构，使用律师代理，与加美澳新律师顾问团队有着良好合作关系。
本 FlyabroadVisa 已收归飞出国香港，该网站已很少维护，只做历史参考。
最新飞出国网站内容请移步 飞出国技术移民及飞出国香港网站。需要帮助请 联系飞出国。
ANZSCO 324 车身修理工、建造工装饰工与喷漆工 Panel beaters, and Vehicle Body Builders, Trimmers and Painters - FLYabroad
ANZSCO 324 车身修理工、建造工装饰工与喷漆工职责概述 - FLYabroad
• PANELBEATERS, AND VEHICLE BODY BUILDERS, TRIMMERS AND PAINTERS repair damage to motor vehicle bodies; construct purpose-built vehicle bodies; fit, repair and replace interior trim and upholstery in vehicles;
• and paint vehicles.
• 制造工艺技术员不在此类中。Fabrication Engineering Trades Workers are excluded from this minor group.
•
ANZSCO 324 车身修理工、建造工装饰工与喷漆工技能要求 Indicative Skill Level - FLYabroad
• 本单元的大多数职位需要具有与下述资质和经验相当的技术层次。Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below
• 在澳洲：AQF证书3级，包括至少2年的在职培训或AQF证书IV级（ANZSCO技术3级）In Australia: AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
• 在新西兰：NNZ资格证4级（ANZSCO技术3级）In New Zealand: NZ Register Level 4 qualification (ANZSCO Skill Level 3)
• 至少3年的工作经验可以代替上述的资格证。At least three years of relevant experience may substitute for the formal qualifications listed above.
• 有时除了资格证外，还需要相关的工作经验和/或在职培训。In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification
ANZSCO 324 车身修理工、建造工装饰工与喷漆工主要职责 Tasks Include - FLYabroad
• 使用机械和液压设备来移除、更换和修理损坏的面板和部件。removing, replacing and repairing damaged panels and parts using mechanical and hydraulic equipment
• 用塑料填充凹陷，对表层凿边和磨光。filling depressions with plastic filler and chiselling and sanding surfaces
• 使用收放机和焊接设备构造框架部分。constructing framework sections in metal, wood, fibreglass and other materials using stretching and shrinking machines and welding equipment
• 将各部分进行螺栓连接、螺钉固定和焊接以形成完整的框架。bolting, screwing, riveting and welding sections together to form complete frameworks
• 对金属薄板、铝板和增强塑料板进行切割和成型加工，使用手动和电动工具讲起安放于框架内 cutting and shaping panels of sheetmetal, aluminium and reinforced plastic and attaching to frameworks using hand and power tools
• 根据图纸和草图准备新的车辆修饰工作，去除旧的覆盖物和装置，并采取新的测量值。preparing new vehicle trim work according to drawings and sketches, and removing old coverings and fittings from vehicles and taking new measurements
• 选择并切割布料、人造革和皮革，使用重型缝纫机缝和。electing and cutting pieces of fabric, vinyl and leather and sewing pieces together using heavy-duty sewing machines
• 安装内部里衬、地板、门饰板、橡皮垫、门锁和扶手。installing and attaching interior lining, floor coverings, armrests, door trims, rubber seals, locks and handles
• 用胶带或纸遮住不需要喷漆的地方。masking areas not to be painted with tape and paper
• 选择并混合颜料以与车辆颜色对称。selecting and mixing paint shades to match vehicle colour
• 使用喷枪完成第一道和最后一道面层，打磨各层之间的表面。applying primer and finish coats with spray-guns, and sanding surfaces between coats
ANZSCO 324 车身修理工、建造工装饰工与喷漆工职位列表 List of occupations - FLYabroad
3241 车身修理工 Panelbeaters
324111 车身修理工 Panel Beater
3242 车身建造工和装饰工 Vehicle Body Builders and Trimmers
324211 车身制造工 Vehicle Body Builder
324212 车辆修饰工 Vehicle Trimmer
3243 车辆喷漆工 Vehicle Painters
324311 汽车喷漆工 Vehicle Painter
参考：
评分标准： 澳大利亚技术移民评分标准 。